This hydraulic power unit is specially designed for electric operating bed in medical equipment, Hydraulic Power Unit For Car,with low noise,low current and light weightjt provides hydraulic power source for the operation bed,Hydraulic Lifter Remover,And it is also suitable for hospital bed.Car Lift Hydraulic Power Unit.
|Type 型号||Motor 电机|| |
H PU1-02BAABH H ADAA
24V 0.5Kw 2000rpm
| 0.5 || |
1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.
2、 This motor is based on gap working system S2=2 ~ 4min(continuous working time), so it cannot run continuously.
3、 Before installation, the cylinder, oil pipe, joint and other hydraulic components must be cleaned and free from any impurities.
4、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
5、 If you need manual oil discharge device for emergency , please specify when ordering.
6、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
7、 The hydraulic oil should be replaced after the first 100 hours' use of the system, and change the oil every 3,000 hours after that.
CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD
Our factory is a professional manufacturer of sealing actuators for dump trucks, hydraulic cylinders, hydraulic power units and related hydraulic parts. In addition, it also produces various oil circuit blocks, hydraulic accessories, and provides users with professional technical services, etc.
Products are widely used in warehousing, logistics operation machinery and automobile-related machinery, construction machinery, railway machinery and other fields. HPU type AC and DC hydraulic power units adopt internationally popular K-type gear pumps, CE standard oil pump motors, high-strength plastic fuel tanks and metal fuel tanks. There are hundreds of oil circuit designs available to meet different types of needs. Main application areas: car lifts, car tail plates, electric stackers, lifting platforms, forklifts, electric basketball stands, chemical machines, plastics Pipe welding machine, concrete mixer, van type wing vehicle, environmental protection capped vehicle, garbage compressor, boarding bridge, medical equipment, flying wing vehicle, automobile tail plate, warehousing and logistics equipment, stacker truck, aerial work platform, environmental protection Covered trucks, boarding bridges, forklifts, etc.
- Company Name: CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD
- Representative: LVJUN
- Product/Service: Hydraulic Power Unit , Hydraulic Pump Unit , Hydraulic Power Station , Power Unit , Hydraulic Poppet Valve , Hydraulic Pilot Valve
- Capital (Million US $): 200万元整
- Year Established: 2016
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 20
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: 21 -30 People
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: No.13, Kuanda Road, Xueyan Town, Wujin District, Changzhou city
- Contact Person: Mr. songwei
- Tel: 86-519-86056606
Premium Related Products